DMVPN Lab 9 : Phase 3 Dynamic Mapping With EIGRP

 LAB 9

Kali ini kita akan Pasang Routing EIGRP pada di semua router baik itu HUB maupun Spoke nya…

HUB

HUB(config)#router eigrp 12 
HUB(config-router)#network 1.1.1.1 0.0.0.0 
HUB(config-router)#network 192.168.10.1 0.0.0.0 
HUB(config-router)#no auto-summary 
HUB(config-router)#exit 
HUB(config)#int tun0 

HUB(config-if)#no ip split-horizon eigrp 12

Spoke-1

Spoke-1(config-if)#router eigrp 12 
Spoke-1(config-router)#network 2.2.2.2 0.0.0.0 
Spoke-1(config-router)#network 192.168.10.2 0.0.0.0 

Spoke-1(config-router)#no auto-summary 

Spoke-2

Spoke-2(config)#router eigrp 12 
Spoke-2(config-router)#network 3.3.3.3 0.0.0.0 
Spoke-2(config-router)#network 192.168.10.3 0.0.0.0 

Spoke-2(config-router)#no auto-summary

Verifikasi routing EIGRP pada di semua router.

Spoke-1

Spoke-1#show ip route eigrp 
 1.0.0.0/32 is subnetted, 1 subnets 
D 1.1.1.1 [90/27008000] via 192.168.10.1, 00:48:08, Tunnel0 
 3.0.0.0/32 is subnetted, 1 subnets 

D 3.3.3.3 [90/28288000] via 192.168.10.1, 00:47:43, Tunnel0 

Test ping

Spoke-1

Spoke-1#ping 1.1.1.1 
Type escape sequence to abort. 
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds: 
!!!!! 

Success rate is 100 percent (5/5), round-trip min/avg/max = 56/71/80 ms

Spoke-1#ping 3.3.3.3 
Type escape sequence to abort. 
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds: 
!!!!! 

Success rate is 100 percent (5/5), round-trip min/avg/max = 76/78/84 ms